
Metal roofing in Fort Lauderdale, FL
The Forest Green standing-seam roof in the photo is ours, on a one-story home in Fort Lauderdale's 33312, south of the New River. Metal is the roof that fits this city best: aluminum where the canals put salt in the air, Galvalume inland, permitted through the City with Miami-Dade NOA panels, financed at $0 down.
Which Fort Lauderdale homes a metal roof suits
Fort Lauderdale is a city of canals, and that decides the metal before anything else. Las Olas Isles, Rio Vista, Harbor Beach, Coral Ridge and Lauderdale Isles are built along the water; Lauderdale Isles, in the same 33312 ZIP as our job, is mid-century ranch homes with a median build year of 1957. Inland, the concrete-block streets around Riverland and Riverside Park and the older grid through Poinsettia Heights, Lake Ridge and Victoria Park carry the same low-pitched roofs under shingle, flat sections or the original tile.
Metal fits all of them: a standing-seam panel weighs a fraction of concrete tile, so a 1950s truss carries it easily; a Kynar 500 finish reflects the heat dark tile soaks up; and a 40–60 year rating makes it the last roof the house needs. The Forest Green roof above went on in September 2024.
Aluminum standing seam on the canals, 24-gauge Galvalume inland
The first thing we measure on a Fort Lauderdale estimate is the distance to salt water. On the finger canals off the Intracoastal and the lower New River, from Las Olas Isles and Rio Vista to Harbor Beach and Coral Ridge, the metal is .032 aluminum: it cannot rust. We pair it with concealed clips and stainless or coated fasteners, so no exposed steel is left for the salt.
More than about a mile from the Intracoastal, 24-gauge Galvalume is the better buy: steel with an aluminum-zinc coating, a stiffer panel for less. Our 33312 roof is Galvalume. Both come as standing seam with hidden clips, the only system we install near the water, or as 5V-crimp inland, in 38 Kynar 500 colors on our materials and colors page; the aluminum-versus-Galvalume guide covers the price gap and the mile rule.
Many mid-century Fort Lauderdale homes carry a flat Florida room or carport off the main gable, and that transition is where they leak; we re-roof the flat section in modified bitumen or TPO on the same permit, with a formed transition flashing.
Fort Lauderdale roofing permits, Miami-Dade NOAs and the historic districts
A metal roof in Fort Lauderdale is permitted by the City's Development Services Department, Building Services, filed digitally through the LauderBuild portal. Broward is inside the High-Velocity Hurricane Zone (HVHZ) of the Florida Building Code, and the city's roof permit checklist calls for Miami-Dade Notices of Acceptance, so panels, clips, edge metal and high-temperature underlayment each carry a current NOA. It also wants the FBC Section 1524 owner notification form, a Notice of Commencement at $5,000 and up and, on homes assessed at $300,000 or more, a hurricane mitigation affidavit on the roof-to-wall connections. We prepare all of it.
There is no roof-over in the HVHZ: the old roof comes off, the deck is re-nailed and the city inspects it at the tin-cap stage. We run the permit as contractor of record (Florida Certified Roofing Contractor CCC1331964) through the final, and you receive the closed permit with every NOA; our guide to roof permits and NOAs explains how to read one.
Three parts of the city are locally designated historic districts: Sailboat Bend, the Himmarshee Street / SW 2nd Avenue district and the Stranahan House district. There, a change to metal needs a Certificate of Appropriateness from the Historic Preservation Board, which meets monthly; we build that month into the schedule.
What a metal roof costs in Fort Lauderdale, and how long it takes
Metal is priced at $950–$1,600 per square (100 sq ft) in our instant roof quote; the written price follows a free inspection. In Fort Lauderdale the number moves on the metal (aluminum costs more than Galvalume), standing seam against 5V-crimp, the color tier, rotten plywood under the old roof (billed per sheet) and a flat addition on the same permit.
Plan review comes first, then the panels are formed to length. With material on site a one-story home is typically under a week, a two-story waterfront home longer, and the house is never open overnight.
A new permitted metal roof earns the wind-mitigation credits on form OIR-B1-1802, the same as tile, and keeps a policy renewable where a 15-to-20-year-old roof may not. Financing is PACE through us as an approved contractor, $0 down, repaid on the tax bill, or a GoodLeap or Service Finance loan from 2.99% APR; see our financing page. The same crews build metal roofing in Miami: we are a Miami roofing company on Ives Dairy Road, just down I-95; compare the metal we chose for North Miami Beach's canal homes and inland Miami Gardens.

See metal roofing across South Florida, everything we do in Fort Lauderdale, or call (786) 999-5353 for a free inspection.
Roofs we have built in Fort Lauderdale
6 Fort Lauderdale roofs photographed by our crews on the job, with the product and the date. Open any one for every photo.
Metal roof
Flat roof
Shingle roof
Shingle roof
Shingle roof
Shingle roofRelated services in Fort Lauderdale
Roof replacement
Tile, shingle, flat and metal roofs on Fort Lauderdale homes, from tear-off to the closed permit, and how a replacement is priced.
Roof replacement →Flat roofs
Modified bitumen and TPO for the flat Florida rooms and carports off so many mid-century Fort Lauderdale homes, tied into the new metal above.
Flat roofs →Roof repair & leaks
Flashing, the metal-to-flat transition and exposed-fastener roofs from other contractors, with a crew on site within 3 hours after a storm.
Roof repair & leaks →Nearby cities
The same crews cover the neighbouring cities from the Ives Dairy Road office.
Fort Lauderdale metal roofing questions
Do I need aluminum for a metal roof in Fort Lauderdale, or is Galvalume enough?
Within about a mile of the Intracoastal, Las Olas Isles, Rio Vista, Harbor Beach and Coral Ridge included, we install .032 aluminum, because salt air pits a steel panel and its fasteners. Inland streets such as Riverland take 24-gauge Galvalume at a lower price; our 33312 roof is Galvalume.
Does a metal roof in a Fort Lauderdale historic district need special approval?
In Sailboat Bend, the Himmarshee Street district and the Stranahan House district, yes: a change to a designated property's exterior needs a Certificate of Appropriateness, and switching to metal goes to the Historic Preservation Board, which meets monthly. We file it.
Is a standing-seam metal roof loud when it rains?
No. Every residential metal roof we build goes over the plywood deck and a self-adhered underlayment, with no hollow space under the panel, so rain sounds the way it did on the old roof.
Will a metal roof lower my insurance in Fort Lauderdale?
It earns the wind-mitigation credits on form OIR-B1-1802 for the NOA covering, the secondary water barrier and the re-nailed deck; some carriers add a credit for metal. The premium change is up to your carrier.
Who issues the permit for a metal roof in Fort Lauderdale, and can you go over my old roof?
The City of Fort Lauderdale Development Services Department, Building Services, through LauderBuild. Broward is in the high-velocity hurricane zone, so no roof-over: the old roof comes off, the deck is re-nailed and inspected, then NOA underlayment and panels go on. We close the permit before the final payment.
